Loading... Please wait...

Product Information

ILS Industrial Lighting
Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8
 
www.ilsindustriallight.com
Phone: (888) 750-7641
Fax: (877) 465-4861
Email Address: customerservice@ilsindustriallight.com

)

TO VIEW OR PRINT INSTALLATION INSTRUCTIONS, PLEASE CLICK ON CORRESPONDING PRODUCT BELOW:


HIGH BAY INSTALLATION INSTRUCTIONS

VAPORTIGHT INSTALLATION INSTRUCTIONS

4 FT. STRIP FIXTURE (T8 OR T5HO)

8 FT. STRIP FIXTURE (T8 OR T5HO)

4 FT. INDUSTRIAL FIXTURE (T8 OR T5HO)

8 FT. INDUSTRIAL FIXTURE (T8 OR T5HO)


 

 

 

 

FLUORESCENT HIGH BAY FIXTURE
HB-4X54
4-LAMP T5HO
Intended Use
Designed for new construction and replacement of
HID fixtures commonly used in manufacturing,
warehousing, commercial and retail facilities.
Construction
The fluorescent high bay fixture channel/ballast
housing is die formed cold rolled steel to allow for
strength and durability. The I-Frame design allows
heat produced by the lamps to be dissipated away
from the ballast housing, protecting the electronic
ballasts from excess external heat. Rotary lock
lamp holders with internal contacts are used to
ensure lamp security.
Finish
The fluorescent high bay fixture channel/ballast
housing and end-plates are white powder coated
after assembly to ensure protection against rust as
well as smooth, dull edges.
Reflector
External aluminum mirror type reflectors are
constructed of high reflectance specular material
providing maximum light reflectance from the high
bay fixture.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, program start, T5HO ballasts
are standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance, or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate High Bay Fixture Dimensions
Length: 46.2”
Width: 13.0”
Height: 3.3”
Mounting
The fluorescent high bay fixtures can be
mounted by chain or cable from hanger brackets
(provided with fixture).
Listings
ETL 3097700 listed, conforms to UL 1598.
Certified to CSA C22.2 No. 250.0.
Warranty
The high bay fixture is provided with a one-year
warranty against manufacturing defects. The
Electronic Ballast warranty is provided directly
through the ballast manufacturer.
Fluorescent High Bay Accessories
• Aircraft cable type hanging gear
• Wire guard
• Door with lens
• Fluorescent lamps

 

 ILS Industrial Lighting

 Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8
FLUORESCENT HIGH BAY FIXTURE
HB-6X54
6-LAMP T5HO
Intended Use
Designed for new construction and replacement of
HID fixtures commonly used in manufacturing,
warehousing, commercial and retail facilities.
Construction
The fluorescent high bay fixture channel/ballast
housing is die formed cold rolled steel to allow for
strength and durability. The, I-Frame design allows
heat produced by the lamps to be dissipated away
from the ballast housing, protecting the ballasts
from excess external heat. Rotary lock lamp
holders with internal contacts are used to ensure
lamp security.
Finish
The fluorescent high bay fixture channel/ballast
housing and end-plates are white powder coated
after assembly to ensure protection against rust as
well as smooth, dull edges.
Reflector
External aluminum mirror type reflectors are
constructed of high reflectance specular material
providing maximum light reflectance from the
fixture.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, program start T5HO ballasts
are standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance, or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate High Bay Fixture Dimensions
Length: 46.20”
Width: 19.50”
Height: 3.35”
Mounting
The fluorescent high bay fixtures can be
mounted by chain or cable from hanger brackets
(provided with fixture).
Listings
ETL 3097700 listed, conforms to UL 1598.
Certified to CSA C22.2 No. 250.0.
Warranty
The fluorescent high bay fixture is provided with
a one-year warranty against manufacturing
defects. Ballast warranty is provided through the
ballast manufacturer.
Fluorescent High Bay Accessories
• Aircraft cable type hanging gear
• Wire guard
• Door with lens

 

 ILS Industrial Lighting

 Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT HIGH BAY FIXTURE
HB-6X32
6-LAMP T8
Intended Use
Designed for new construction and replacement of
HID fixtures commonly used in manufacturing,
warehousing, commercial and retail facilities.
Construction
The fluorescent high bay fixture channel/ballast
housing is die formed cold rolled steel to allow for
strength and durability. The I-Frame design allows
heat produced by the lamps to be dissipated away
from the ballast housing, protecting the ballasts
from excess external heat. Rotary lock lamp
holders with internal contacts are used to ensure
lamp security.
Finish
The fluorescent high bay Channel/Ballast
housing and end-plates are white powder coated
after assembly to ensure protection against rust as
well as smooth, dull edges.
Reflector
External aluminum mirror type reflectors are
constructed of high reflectance specular material
providing maximum light reflectance from the
fixture.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, instant start T8 ballasts are
standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate High Bay Fixture Dimensions
Length: 48.1”
Width: 19.5”
Height: 3.3”
Mounting
The fluorescent high bay fixtures can be
mounted by chain or cable from hanger brackets
(provided with fixture).
Listings
ETL 3097700 listed, conforms to UL 1598.
Certified to CSA C22.2 No. 250.0.
Warranty
The high bay fixture is provided with a one-year
warranty against manufacturing defects. Ballast
warranty is provided through the ballast
manufacturer.
Fluorescent High Bay Accessories
• Aircraft cable type hanging gear
• Wire guard
• Door with lens

 

 ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT HIGH BAY FIXTURE
HB-8X54
8-LAMP T5HO
Intended Use
Designed for new construction and replacement of
HID fixtures commonly used in manufacturing,
warehousing, commercial and retail facilities.
Construction
The fluorescent high bay fixture channel/ballast
housing is die formed cold rolled steel to allow for
strength and durability. The I-Frame design allows
heat produced by the lamps to be dissipated away
from the ballast housing, protecting the ballasts
from excess external heat. Rotary lock lamp
holders with internal contacts are used to ensure
lamp security.
Finish
The fluorescent high bay Channel/Ballast
housing and end-plates are white powder coated
after assembly to ensure protection against rust as
well as smooth, dull edges.
Reflector
External aluminum mirror type reflectors are
constructed of high reflectance specular material
providing maximum light reflectance from the
fixture.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, program start T5HO ballasts
are standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance, or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate High Bay Fixture Dimensions
Length: 46.2”
Width: 25.84”
Height: 3.35”
Mounting
The fluorescent high bay fixtures can be
mounted by chain or cable from hanger brackets
(provided with fixture).
Listings
ETL 3097700 listed, conforms to UL 1598.
Certified to CSA C22.2 No. 250.0.
Warranty
The fluorescent high bay fixture is provided with
a one-year warranty against manufacturing
defects. Ballast warranty is provided through the
ballast manufacturer.
Fluorescent High Bay Accessories
• Aircraft cable type hanging gear
• Wire guard
• Door with lens

  

 ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT HIGH BAY FIXTURE
HB-8X32
8-LAMP T8
Intended Use
Designed for new construction and replacement of
HID fixtures commonly used in manufacturing,
warehousing, commercial and retail facilities.
Construction
The fluorescent high bay fixture channel/ballast
housing is die formed cold rolled steel to allow for
strength and durability. The I-Frame design allows
heat produced by the lamps to be dissipated away
from the ballast housing, protecting the ballasts
from excess external heat. Rotary lock lamp
holders with internal contacts are used to ensure
lamp security.
Finish
The fluorescent high bay fixture channel/ballast
housing and end-plates are white powder coated
after assembly to ensure protection against rust as
well as smooth, dull edges.
Reflector
External aluminum mirror type reflectors are
constructed of high reflectance specular material
providing maximum light reflectance from the
fixture.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, instant start T8 ballasts are
standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate High Bay Fixture Dimensions
Length: 48.1”
Width: 25.84”
Height: 3.35”
Mounting
The fluorescent high bay fixtures can be
mounted by chain or cable from hanger brackets
(provided with fixture).
Listings
ETL 3097700 listed, conforms to UL 1598.
Certified to CSA C22.2 No. 250.0.
Warranty
The high bay fixture is provided with a one-year
warranty against manufacturing defects. Ballast
warranty is provided through the ballast
manufacturer.
Fluorescent High Bay Accessories
• Aircraft cable type hanging gear
• Wire guard
• Door with lens

 

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT VAPOR TIGHT FIXTURE
VT4-2X32
2-LAMP T8
Intended Use
Intended for specific applications that are wet or
controlled such as food/beverage processing,
pharmaceuticals, or other non hazardous
environments. Certain applications that have
airborne contaminates can decrease the integrity
of the polycarbonate fixture.
Construction
Non-conductive, non-corrosive, fully gasketed grey
polycarbonate housing and clear polycarbonate
diffuser. Detachable stainless steel clips form seal
between housing and diffuser. Internal steel gear
plate of the fluorescent fixture adds strength and
durability for pendant mounting. Smooth housing
and diffuser components allow for easy cleaning.
Finish
All metal parts of the fluorescent fixture are white
powder coated post manufacturing to ensure
smooth edges.
Diffuser
Diffuser is polycarbonate with a smooth outside
and prismatic inside to allow for maximum light as
well as easy cleaning.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, instant start T8 ballasts are
standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture Dimensions
LENGTH: 50”
WIDTH: 6”
HEIGHT: 4.2”
Mounting
The fluorescent fixture can be surface mounted,
suspended, or pendant mounted (with optional
pendant mounting kit).
Listings
ETL 3097700 listed, conforms to UL 1598.
Certified to CSA C22.2 No. 250.0.
Warranty
The fluorescent fixture has a one year warranty
against manufacturing defects. Ballast warranty is
provided through the ballast manufacturer.
Fluorescent Fixture Accessories
• Pendant mounting kit
• Aircraft cable type hanging gear


 ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT VAPOR TIGHT FIXTURE
VT4-2X54
2-LAMP T5HO
Intended Use
Intended for specific applications that are wet or
controlled such as food/beverage processing,
pharmaceuticals, or other non hazardous
environments. Certain applications that have
airborne contaminates can decrease the integrity
of the polycarbonate fixture.
Construction
Non-conductive, non-corrosive, fully gasketed grey
polycarbonate housing and clear polycarbonate
diffuser. Detachable stainless steel clips form seal
between housing and diffuser. Internal steel gear
plate adds strength and durability for pendant
mounting. Smooth housing and diffuser
components allow for easy cleaning.
Finish
All metal parts are white powder coated post
manufacturing to ensure smooth edges.
Diffuser
Diffuser is polycarbonate with a smooth outside
and prismatic inside to allow for maximum light as
well as easy cleaning.
Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, program start T5HO ballasts
are standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture Dimensions
LENGTH: 50”
WIDTH: 6”
HEIGHT: 4.2”
Mounting
The fluorescent fixture can be surface mounted,
suspended, or pendant mounted (with optional
pendant mounting kit).
Listings
ETL 3097700 listed, conforms to UL 1598.
Certified to CSA C22.2 No. 250.0.
Warranty
The fluorescent fixture has a one year warranty
against manufacturing defects. Ballast warranty is
provided through the ballast manufacturer.
Fluorescent Fixture Accessories
• Pendant mounting kit
• Aircraft cable type hanging gear


 ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT VAPOR TIGHT FIXTURE
VT4-3X32
3-LAMP T8
Intended Use
Intended for specific applications that are wet or
controlled such as food/beverage processing,
pharmaceuticals, or other non hazardous
environments. Certain applications that have
airborne contaminates can decrease the integrity
of the polycarbonate fixture.
Construction
Non-conductive, non-corrosive, fully gasketed grey
polycarbonate housing and clear polycarbonate
diffuser. Detachable stainless steel clips form seal
between housing and diffuser. Internal steel gear
plate adds strength and durability for pendant
mounting. Smooth housing and diffuser
components allow for easy cleaning.
Finish
All metal parts are white powder coated post
manufacturing to ensure smooth edges.
Diffuser
Diffuser is polycarbonate with a smooth outside
and prismatic inside to allow for maximum light as
well as easy cleaning.
Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, instant start T8 ballasts are
standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture Dimensions
LENGTH: 50”
WIDTH: 6”
HEIGHT: 4.2”
Mounting
Fixture can be surface mounted, suspended, or
pendant mounted (with optional pendant mounting
kit).
Listings
ETL 3097700 listed, conforms to UL 1598.
Certified to CSA C22.2 No. 250.0.
Warranty
The fluorescent fixture has a one year warranty
against manufacturing defects. Ballast warranty is
provided through the ballast manufacturer.
Fluorescent Fixture Accessories
• Pendant mounting kit
• Aircraft cable type hanging gear

 

 ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT VAPOR TIGHT FIXTURE
VT2-2X17
2-LAMP T8
Intended Use
Intended for specific applications that are wet or
controlled such as food/beverage processing,
pharmaceuticals, or other non hazardous
environments. Certain applications that have
airborne contaminates can decrease the integrity
of the polycarbonate fixture.
Construction
The has non-conductive, non-corrosive, fully
gasketed grey polycarbonate housing and clear
polycarbonate diffuser. Detachable stainless steel
clips form seal between housing and diffuser.
Internal steel gear plate of the fluorescent fixture
adds strength and durability for pendant mounting.
Smooth housing and diffuser components allow for
easy cleaning.
Finish
All metal parts are of the fluorescent fixture are
white powder coated post manufacturing to ensure
smooth edges.
Diffuser
Diffuser is polycarbonate with a smooth outside
and prismatic inside to allow for maximum light as
well as easy cleaning.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, instant start T8 ballasts are
standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
.
Approximate Fluorescent Fixture Dimensions
LENGTH: 25”
WIDTH: 6”
HEIGHT: 4.2”
Mounting
The fluorescent fixture can be surface mounted,
suspended, or pendant mounted (with optional
pendant mounting kit).
Listings
ETL 3097700 listed, conforms to UL 1598.
Certified to CSA C22.2 No. 250.0.
Warranty
The fluorescent fixture has a one year warranty
against manufacturing defects. Ballast warranty is
provided through the ballast manufacturer.
Fluorescent Fixture Accessories
• Pendant mounting kit
• Aircraft cable type hanging gear


 ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
S4-232
2-LAMP T8
Intended Use
Commonly used in commercial, industrial, or retail
applications that require low to medium light
levels.
Construction
The fluorescent fixture has heavy duty industrial
channel made of die embossed steel for optimal
strength. Welded endplates with knockouts for
individual or row mounting. Rotary lock lamp
holders are used to ensure contact and security of
the lamps.
Finish
All steel parts of the fluorescent fixture are white
powder coated post manufacturing to ensure
smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, instant start T8 ballasts are
standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpak.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescet Fixture
Dimensions:
LENGTH: 48.5”
WIDTH: 3.3”
HEIGHT: 3.5”
Mounting
The fluorescent fixtures can be surface mounted
or by chain or cable.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for one year
warranty against manufacturing defects. Ballast
warranty is provided through the ballast
manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
S4-254
2-LAMP T5HO
Intended Use
Commonly used in commercial, industrial, or retail
applications that require medium to high light
levels.
Construction
The fluorescent fixture has heavy duty industrial
channel made of die embossed steel for optimal
strength. Welded endplates with knockouts for
individual or row mounting. Rotary lock lamp
holders are used to ensure contact and security of
the lamps.
Finish
All steel parts of the fluorescent fixture are white
powder coated post manufacturing to ensure
smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, program start T5HO ballasts
are standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark..
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions:
LENGTH: 46.5”
WIDTH: 7”
HEIGHT: 3.5”
Mounting
The fluorescent fixtures can be surface mounted
or by chain or cable.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for one year
warranty against manufacturing defects. Ballast
warranty is provided through the ballast
manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
S8-432
4-LAMP T8
Intended Use
Commonly used in commercial, industrial, or retail
applications that require low to medium light
levels.
Construction
The fluorescent fixture has heavy duty industrial
channel made of die embossed steel for optimal
strength. Welded endplates with knockouts for
individual or row mounting. Rotary lock lamp
holders are used to ensure contact and security of
the lamps.
Finish
All steel parts of the fluorescent fixture are white
powder coated post manufacturing to ensure
smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, instant start T8 ballasts are
standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions
LENGTH: 97.5”
WIDTH: 3.3”
HEIGHT: 3.5”
Electrical
Energy efficient electronic, automatic resetting,
high power factor ballasts are standard in every
fixture. Ballasts used are either GE, Sylvania, or
Advance.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for one year
warranty against manufacturing defects. Ballast
warranty is provided through the ballast
manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
S8-454
4-LAMP T5HO
Intended Use
Commonly used in commercial, industrial, or retail
applications that require medium to high light
levels.
Construction
The fluorescent fixture has heavy duty industrial
channel made of die embossed steel for optimal
strength. Welded endplates with knockouts for
individual or row mounting. Rotary lock lamp
holders are used to ensure contact and security of
the lamps.
Finish
All steel parts of the fluorescent fixture are white
powder coated post manufacturing to ensure
smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, program start T5HO ballasts
are standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions
LENGTH: 93.5”
WIDTH: 3.3”
HEIGHT: 3.5”
Electrical
Energy efficient electronic, automatic resetting,
high power factor ballasts are standard in every
fixture. Ballasts used are either GE, Sylvania, or
Advance.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for one year
warranty against manufacturing defects. Ballast
warranty is provided through the ballast
manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
I4-232M
2-LAMP T8
Intended Use
Commonly used in commercial, industrial, or retail
applications that require low to medium light
levels.
Construction
The fluorescent fixture has heavy duty industrial
channel made of die embossed steel for optimal
strength. Welded endplates with knockouts for
individual or row mounting. Rotary lock lamp
holders are used to ensure contact and security of
the lamps.
Reflector
Standard 7” mirror reflector attaches easily with
tool-less ¼ turn latch.
Finish
All steel parts of the fluorescent fixture are white
powder coated post manufacturing to ensure
smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, instant start T8 ballasts are
standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions:
LENGTH: 48.5”
WIDTH: 7”
HEIGHT: 3.5”
Mounting
The fluorescent fixtures can be surface mounted
or by chain or cable.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for one year
warranty against manufacturing defects. Ballast
warranty is provided through the ballast
manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
I4-232W
2-LAMP T8
Intended Use
Commonly used in commercial, industrial,
or retail applications that require low to
medium light levels.
Construction
The fluorescent fixture has heavy duty
industrial channel made of die embossed
steel for optimal strength. Welded
endplates with knockouts for individual or
row mounting. Rotary lock lamp holders are
used to ensure contact and security of the
lamps.
Reflector
Standard 7” white powder coated steel
reflector attaches easily with tool less ¼
turn latch.
Finish
All steel parts of the fluorescent fixture are
white powder coated post manufacturing to
ensure smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt,
electronic, automatic resetting, instant start
T8 ballasts are standard in all fixtures.
Ballasts installed in fixtures are either GE,
Sylvania, Advance or Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions:
LENGTH: 48.5”
WIDTH: 7”
HEIGHT: 3.5”
Mounting
The fluorescent fixtures can be surface mounted
or by chain or cable.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for one year
warranty against manufacturing defects. Ballast
warranty is provided through the ballast
manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
I4-254M
2-LAMP T5HO
Intended Use
Commonly used in commercial, industrial,
or retail applications that require medium to
high light levels.
Construction
The fluorescent fixture has heavy duty
industrial channel made of die embossed
steel for optimal strength. Welded
endplates with knockouts for individual or
row mounting. Rotary lock lamp holders are
used to ensure contact and security of the
lamps.
Reflector
Standard 7” mirror reflector attaches easily
with tool-less ¼ turn latch.
Finish
All steel parts of the fluorescent fixture are
white powder coated post manufacturing to
ensure smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt,
electronic, automatic resetting, program start
T5HO ballasts are standard in all fixtures.
Ballasts installed in fixtures are either GE,
Sylvania, Advance or Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions
LENGTH: 46.5”
WIDTH: 7”
HEIGHT: 3.5”
Mounting
The fluorescent fixtures can be surface
mounted or by chain or cable.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for
one year warranty against manufacturing
defects. Ballast warranty is provided
through the ballast manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
I4-254W
2-LAMP T5HO
Intended Use
Commonly used in commercial, industrial,
or retail applications that require medium to
high light levels.
Construction
The fluorescent fixture has heavy duty
industrial channel made of die embossed
steel for optimal strength. Welded
endplates with knockouts for individual or
row mounting. Rotary lock lamp holders are
used to ensure contact and security of the
lamps.
Reflector
Standard 7” white powder coated steel
reflector attaches easily with tool-less ¼
turn latch.
Finish
All steel parts of the fluorescent fixture are
white powder coated post manufacturing to
ensure smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt,
electronic, automatic resetting, program start
T5HO ballasts are standard in all fixtures.
Ballasts installed in fixtures are either GE,
Sylvania, Advance or Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions
LENGTH: 46.5”
WIDTH: 7”
HEIGHT: 3.5”
Mounting
The fluorescent fixtures can be surface
mounted or by chain or cable.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for
one year warranty against manufacturing
defects. Ballast warranty is provided
through the ballast manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
I8-432M
4-LAMP T8
Intended Use
Commonly used in commercial, industrial,
or retail applications that require low to
medium light levels.
Construction
The fluorescent fixture has heavy duty
industrial channel made of die embossed
steel for optimal strength. Welded
endplates with knockouts for individual or
row mounting. Rotary lock lamp holders are
used to ensure contact and security of the
lamps.
Reflector
Standard 7” mirror reflector attaches easily
with tool-less ¼ turn latch.
Finish
All steel parts of the fluorescent fixture are
white powder coated post manufacturing to
ensure smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt,
electronic, automatic resetting, instant start
T8 ballasts are standard in all fixtures.
Ballasts installed in fixtures are either GE,
Sylvania, Advance or Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions
LENGTH: 97.5”
WIDTH: 7”
HEIGHT: 3.5”
Electrical
Energy efficient electronic, automatic
resetting, high power factor ballasts are
standard in every fixture. Ballasts used are
either GE, Sylvania, or Advance.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for
one year warranty against manufacturing
defects. Ballast warranty is provided
through the ballast manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
I8-432W
4-LAMP T8
Intended Use
Commonly used in commercial, industrial, or retail
applications that require low to medium light
levels.
Construction
The fluorescent fixture has Heavy duty industrial
channel made of die embossed steel for optimal
strength. Welded endplates with knockouts for
individual or row mounting. Rotary lock lamp
holders are used to ensure contact and security of
the lamps.
Reflector
Standard 7” white powder coated steel reflector
attaches easily with tool less ¼ turn latch.
Finish
All steel parts of the fluorescent fixture are white
powder coated post manufacturing to ensure
smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, instant start T8 ballasts are
standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions
LENGTH: 97.5”
WIDTH: 7”
HEIGHT: 3.5”
Electrical
Energy efficient electronic, automatic
resetting, high power factor ballasts are
standard in every fixture. Ballasts used are
either GE, Sylvania, or Advance.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for
one year warranty against manufacturing
defects. Ballast warranty is provided
through the ballast manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
I8-454M
4-LAMP T5HO
Intended Use
Commonly used in commercial, industrial, or retail
applications that require medium to high light
levels.
Construction
The fluorescent fixture has heavy duty industrial
channel made of die embossed steel for optimal
strength. Welded endplates with knockouts for
individual or row mounting. Rotary lock lamp
holders are used to ensure contact and security of
the lamps.
Reflector
Standard 7” mirror reflector attaches easily with
tool-less ¼ turn latch.
Finish
All steel parts of the fluorescent fixture are white
powder coated post manufacturing to ensure
smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, program start T5HO ballasts
are standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark.
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions
LENGTH: 93”
WIDTH: 7”
HEIGHT: 3.5”
Electrical
Energy efficient electronic, automatic resetting,
high power factor ballasts are standard in every
fixture. Ballasts used are either GE, Sylvania, or
Advance.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for one year
warranty against manufacturing defects. Ballast
warranty is provided through the ballast
manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard

ILS Industrial Lighting

Manufacturer of high quality T5 and T8 fluorescent light fixtures including:
Fluorescent high bay fixtures, T5 and T8
Fluorescent strip fixtures, T5 and T8
Fluorescent industrial fixtures, T5 and T8
Fluorescent vapor proof fixtures, T5 and T8

FLUORESCENT STRIP FIXTURE
I8-454W
4-LAMP T5HO
Intended Use
Commonly used in commercial, industrial, or retail
applications that require low to medium light
levels.
Construction
The fluorescent fixture has heavy duty industrial
channel made of die embossed steel for optimal
strength. Welded endplates with knockouts for
individual or row mounting. Rotary lock lamp
holders are used to ensure contact and security of
the lamps.
Reflector
Standard 7” white powder coated steel reflector
attaches easily with tool-less ¼ turn latch.
Finish
All steel parts of the fluorescent fixture are white
powder coated post manufacturing to ensure
smooth edges.
Electronic Ballast
Energy efficient, 120-277 multi-volt, electronic,
automatic resetting, program start T5HO ballasts
are standard in all fixtures. Ballasts installed in
fixtures are either GE, Sylvania, Advance or
Sunpark..
© 2009 ILS Industrial Lighting. All rights reserved. 09/09
Approximate Fluorescent Fixture
Dimensions
LENGTH: 93”
WIDTH: 7”
HEIGHT: 3.5”
Electrical
Energy efficient electronic, automatic resetting,
high power factor ballasts are standard in every
fixture. Ballasts used are either GE, Sylvania, or
Advance.
Listings
UL 1598 listed
Warranty
The fluorescent fixture is warranted for one year
warranty against manufacturing defects. Ballast
warranty is provided through the ballast
manufacturer.
Fluorescent Strip Fixture Accessories
• Aircraft cable type hanging gear
• Wire guard